tertiary treatment
Reading time:The main purpose of tertiary treatment is:
- colour removal;
- hard COD and suspended solids reduction.
The following are the most frequently used techniques:
- coagulation-flocculation with the negative impact of additional costs for reagents and processing additional sludge output;
- ozonation or ozonation followed by the BIOFOR (Oxyblue) which presents a number of advantages:
- compactness;
- high efficiency;
- little or no sludge production;
- when ozone is produced from pure oxygen, the excess oxygen is recovered and re-injected into the biological aeration tank, thus reducing aeration power consumption.
![Close](/web/bundles/degremontememento/images/close_modal.png)
![treatment textile industry colour removal](https://www.suezwaterhandbook.com/web/var/degremont/storage/images/procedes-et-technologies/processus-industriels-et-traitements-des-effluents-residuaires/industrie-textile/traitement-tertiaire/dossier-media/traitement-effluents-industie-textile-decoloration-poussee/93554-4-eng-GB/treatment-textile-industry-colour-removal2_articlewidth.jpg)
![Secured image](/web/bundles/degremontememento/images/protected_image.png)
Bookmark tool
Click on the bookmark tool, highlight the last read paragraph to continue your reading later![Close](/web/bundles/degremontememento/images/close_modal.png)
![](/web/bundles/degremontememento/images/txtbookmark_notconnected.png)