bound chlorine : chloramines

Reading time:

Chloramines are only used in disinfection (see the oxidants and disinfectants). They are prepared on site through the reaction of chlorine with ammonia or ammonia salts.

Compared with monochloramines, chlorine at a pH lower or equal than 7 is 200, 50 and 2.5 times more active for the inactivation bacteria, viruses, spores and cysts respectively (table 3).

CT values inactivation micro-organismsSecured image
Table 3. Range of CT values required for2 log (99%) inactivation of the main micro-organisms using chloramines at a pH of 8 to 9 and a temperature of between 5 and 25°C.

Therefore, chloramines are not used in primary disinfection. However, they are used in the following secondary disinfection cases because of their high remanence:

  • high levels of THM precursors in treated water, prohibiting the use of chlorine;
  • extensive networks with high temperatures and contact times;
  • lined pipes creating an unpleasant taste when chlorine is used.

Chloramines have become increasingly widespread in the USA (public accustomed to the taste of chlorine).

read more :
Oxidation, Chlorination, Disinfection
< applications

Bookmark tool

Click on the bookmark tool, highlight the last read paragraph to continue your reading later
Close